First, the use of products
The paraffin wax is an important factor affecting the oil yield and the cycle of pump inspection, especially in oil production in the late and early water, wax deposition phenomenon is more serious. In order to solve this problem, adding paraffin remover is a kind of effective method.
We have developed the paraffin remover kd-18 combined with advantages of similar products, the main solvent, cosolvent, wax agent, dispersing agent, penetrating agent compound and, can effectively will, such as wax, resin and asphaltene deposition from the pipe wall is dissolved and dispersed in to clear oil and crude oil gathering and transportation pipeline, such as wax, resin and asphaltene deposition. It has the characteristics of fast dissolving wax, high saturation and high wax content. It can prevent the deposition of wax crystal, which has the function of anti wax. It has the dual properties of paraffin wax and paraffin wax. The product is suitable for removing the wax from the oil well and preventing the formation of the wax deposition, the formation of the oil well and the cleaning of the oil pipeline.
Two, technical requirements
 

Project	Index
Appearance	Homogeneous liquid
Flash point，℃	≥15
Freezing point,℃	≤―15
Wax dissolving rate, g/min	≥0.025
Organic chlorine content，%	0
The content of carbon disulfide，%	0

Three, the use of methods
1 oil well wax, wax removal agent from the annulus, oil pumping cycle set to open 2 hours, normal production.
2 oil wells wax, wellhead dosing tank, regular quantitative dosing.
3 wax formation plugging, the wax removal agent from the tubing into the formation, opening the well shut in production after 3-4 hours.
4 oil pipeline cleaning, using cement truck pump into the paraffin inhibitor, soak the reaction 2-8 hours, pressure transmission.
Field use of anti - dose to be based on the degree of paraffin wax.

Four, storage and transportation
1 store in a cool, ventilated warehouse. Away from the fire, heat, direct sunlight. Keep container seal. Should be stored separately with the oxidant, avoid mixing.
2 the storage area should be equipped with a leak emergency treatment equipment and suitable shelter materials.
3 transport and handling should be handled gently and prevent violent collision, extrusion, inversion, so as to avoid damage to packaging and containers, leakage.

Five, matters needing attention
1 products are flammable, no fireworks, far away from the fire source. Smoking is strictly prohibited in the workplace. Mechanical equipment and tools for the prohibition of the use of easy to produce sparks.
2 in the course of use, the staff should wear self absorption filter gas mask (half mask), wear chemical safety glasses, wear gas, anti-static clothing, wear rubber oil resistant gloves. Ventilation systems and equipment using explosion proof type. To prevent steam from leaking into the air in the workplace. Avoid contact with oxidizing agents. When filling, the flow rate should be controlled, and the grounding device, to prevent the accumulation of static electricity. When moving to light light unloading, equipped with the appropriate variety and quantity of fire equipment and emergency handling equipment. Empty containers may contain harmful substances.
3 once the leakage occurs, eliminate all ignition sources. According to the liquid flow and vapor diffusion influence area delimit warning zone, regardless of the personnel from the wind, the wind to evacuate to safe areas. No contact or cross leakage. As far as possible to cut off the source of leakage. To prevent leakage of water into the water, sewer, basement or restricted space. Small amount of leakage: absorption of sand or other non combustible material. Is a clean, non - spark tool for collecting and absorbing material. A large leak: construct a barrierpit to contain. A lot of liquid with sand or vermiculite, inert material absorption. With foam cover, reduce evaporation. Explosion proof pump transferred to tankexclusive collector.