First, the use of products
Sludge dispersion profile control agent KD-75 for oil sludge dispersed in water and so on, additives, it not only makes oil sludge dispersed in water, and the sludge has good suspension, to meet the sludge of large injection provides a reliable guarantee.

Two, technical requirements

 

Project	Index
Appearance	White or pale yellow liquid
Density，g/cm3	≥1.28
Effective content,%	≥30
Suspension stabilization time，h	≥6

Three, the use of methods
According to the different characteristics of the sludge in general the use of the concentration of 0.2-0.8%, the use of sludge concentration in general 2-7%. When used, the sludge is stirred and dispersed into small particles, and then the dispersing agent is added, and the other additives are added, and the stirring uniform can be used.

Four, storage and transportation
1 products stored in ventilated, dry place, prevent direct sunlight.
2 in the process of transportation and handling to prevent severe collisions, so as not to leak.

Five, matters needing attention
In the use process, the staff shall wear labor protection supplies, to prevent products splashed into the eyes or contact to the skin, once the occurrence of the above phenomenon, immediately wash with plenty of water, in serious cases, timely medical treatment. Sprinkle on the ground should be as far as possible, for a small number of products with soil landfill, you can also use a large amount of water to wash, wash water into the waste water system.