Increasing agent SL-N
2019-04-18 14:51Source:
![](/d/file/p/20a6e852cfdb1d6cfa98af2de5fcbb03.jpg)
First, the use of products
The product is composed of two agents a and B, site after mixing can at reservoir temperature higher than 60 DEG C to react violently, and release a lot of nitrogen and heat, so as to increase the energy of the reservoir, due to formation in large amounts of gas and heat generation, to into the well fluid flowback.
Two, technical requirements
Project | Index |
Appearance | Homogeneous liquid |
Density, g/cm3 | 1.0 |
pH value | 6~7 |
Heat production,≥70℃ | Self heating |
gas production,L/100g | ≥3.5 |
Three, the use of methods
In the acidification subject acid and fracturing fluid preflush add 3 ~ 5% SL n, then the normal operation of the construction, until the job is completed flowback after.
Four, storage and transportation
1 store in a cool, ventilated warehouse. Away from the fire, heat, direct sunlight. Keep container seal.
2 transport and handling should be handled gently and prevent violent collision, extrusion, inversion, so as to avoid damage to packaging and containers, leakage.
Five, matters needing attention
In the use process, the staff shall wear labor protection supplies, to prevent products splashed into the eyes or contact to the skin, once the occurrence of the above phenomenon, immediately wash with plenty of water, in serious cases, timely medical treatment. Sprinkle on the ground should be as far as possible, for a small number of products with soil landfill, you can also use a large amount of water to wash, wash water into the waste water system.