First. Product use
No white fluorescent lubricant is my unit according to the need of drilling mud production of a non fluorescent, environmentally friendly and efficient lubricant. The product is composed of white oil, antiwear agent, surface active agent. In use without heating melt or dissolve in the solvent and the film is uniform and good coverage of, easy and other substances in the aqueous solution or emulsion compound, is safe, efficient and economical advantages, lubricants, water soluble, of shale swelling suppression is good, no fluorescence, added to the drilling fluid can significantly improve the restrain and lubrication, prevent borehole collapse and improving drilling speed. Can be used for drilling mud, no interference on logging interpretation.

Two. Technical requirements

Project	Index
Density,g/cm3	0.90±0.05
Kinematic viscosity（40℃） ，mm2 /s	≥6.0
Fluorescence grade	≤4.0
Flash point，℃	≥130.0
Water content，%	≤2.0
Reduction ratio of adhesion coefficient，%	≥40

Three. Methods of use
1 the product can be used in drilling mud to effectively reduce the friction, prevent drilling tool and borehole wall sticking card, prevent the wall from collapsing.
2 recommended dosage: 1 ~ 5%, the scene can be adjusted according to the actual situation of the corresponding increase

Four. Storage and transportation
1 products stored in ventilated, dry place, prevent direct sunlight, far away from the fire source.
2 transport and handling should be handled gently and prevent violent collision, collision and inversion, packaging to prevent breakage.

Five. Matters needing attention
In the use process, the staff shall wear labor protection supplies, to prevent products splashed into the eyes or contact to the skin, once the phenomenon occurs, rinse with water, in serious cases, timely medical treatment. Sprinkle on the ground should be as far as possible, for a small number of products with soil landfill, you can also use a large amount of water to wash, wash water into the waste water system.