First, the use of products
Drilling fluid with defoaming agent general is our factory according to the needs of Jiangsu oilfield drilling mud, research and production of a new product, it is composed of stearic acid salt and many kinds of additives, with defoaming, good lubrication performance, low price, is drilling fluid good defoaming lubricant.

Two, technical requirements

 

Project	Index
Recovery rate of fresh water drilling fluid density,%	≥98
Density recovery rate of brine drilling fluid,%	≥98

Three, the use of methods
This product can be directly added to various water-based drilling fluid system, used to eliminate all kinds of foam, foam, foam suppression ability. The general dosage is 0.2 ~ 0.5%.

Four, storage and transportation
1 store in a cool, dry, ventilated place, prevent direct sunlight, away from the fire source.
2 transport and handling should be handled gently and prevent violent collision, extrusion, inversion.

Five, matters needing attention
1 no fireworks, away from the fire source, to prevent violent collisions.
2. In the process of using, the staff shall wear labor protection supplies, to prevent products splashed into the eyes or contact to the skin, once the occurrence of the above phenomenon, immediately wash with plenty of water, in serious cases, timely medical treatment. Sprinkle on the ground should be recycled as much as possible, for a small number of products used in the landfill.